| 配件信息 |
| FC号 | PN号 | 品牌 | 描述 |
| 磁带 |
| 199704-001 | HP | DLT cleaning cartridge - Not for DLT 1 or DLT VS |
| 217861-B21 | HP | DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Package of 21 tapes |
| 217862-B22 | HP | DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Package of 315 tapes |
| 295192-B21 | HP | DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Package of seven tapes |
| 295194-B21 | HP | DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives |
| 9164-0723 | HP | DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives |
| C1192-60127 | HP | Dual cartridge picker assembly with motors - Cartridge holding mechanism - Transports cartridges between the mail slot, storage slots, and the DLT drives |
| C5141-60010 | HP | DLT type IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives |
| C5141A | HP | DLTtape IIIXT tape cartridge - 15GB native capacity RoHS: Modified |
| C5141FL | HP | DLTtape IV pre-labeled tape cartridges - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Includes bar code labels - Package of 20 pre-labeled tapes |
| C5141L | HP | DLTtape IV pre-labeled tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Includes bar code label |
| C5142-60010 | HP | DLT cleaning cartridge - Not for DLT 1 or DLT VS - |
| 磁带驱动器 |
| C5177-69102 | HP | DLT 7000 Fast Wide SCSI tape drive assembly - Includes drive, enclosure, and cooling fan - (Uses Two Drives) |
| 其它 |
| 1250-2548 | HP | Active Single-Ended SCSI terminator - Has 50 pin high density connector with thumbscrews |
| C1160-00216 | HP | Lower right cover panel (Flint Gray) |
| C1160-00606 | HP | Top RFI panel (Black) |
| C1160-00607 | HP | RFI panel (Black) |
| C1160-00608 | HP | Cover panel (Black) |
| C1160-00618 | HP | Cover panel (Parchment White) - Installed on the middle front near the bottom |
| C1160-60022 | HP | Control/display board - Mounts in the top of the cabinet |
| C1160-60023 | HP | Gearbox assembly (does not include the motor) - For vertical motion drive - Mounts in the bottom of the cabinet |
| C1160-60024 | HP | Vertical motion motor - Mounts to the gearbox in the bottom of the cabinet |
| C1160-60025 | HP | Idler pulley assembly - Cables (ropes) are routed around these pulleys |
| C1160-60030 | HP | Encoder strip - In front right corner of the picker elevator area |
| C1160-60034 | HP | Vertical motion cable (rope) - The main drive cable in the cabinet |
| C1160-60035 | HP | Horizontal motion cable (rope) - Short drive cable between the picker assembly and the carriage (translate) frame |
| C1160-60036 | HP | Coupler assembly - Couples the cables (ropes) together |
| C1160-60037 | HP | Tensioner assembly - Attaches to cables (ropes) to adjust their tension |
| C1160-60039 | HP | Vertical encoder mount - Includes the spring |
| C1160-60046 | HP | Capture roller assembly - Includes translate rope keeper and rope tensioner spring |
| C1160-60057 | HP | Vertical-path-clear sensor cable |
| C1160-60065 | HP | Control/front panel cable |
| C1160-60078 | HP | Front panel and top cover windows |
| C1160-60080 | HP | Right panel standby power switch cable |
| C1160-60090 | HP | Cover panel (Flint Gray) - Installed on top left |
| C1160-60091 | HP | Cover panel (Parchment White) - Installed on top left |
| C1160-60093 | HP | Cover panel (Parchment White) - Installed on left front |
| C1160-60094 | HP | Cover panel (Flint Gray) |
| C1160-60095 | HP | Cover panel (Flint Gray) - Installed on right front |
| C1160-60096 | HP | Cover panel (Parchment White) - Installed on right front |
| C1192-00204 | HP | Rear cover panel with opening for access door |
| C1192-00209 | HP | Access door (Parchment White) |
| C1192-48305 | HP | Upper left cover panel - With mail slot gate |
| C1192-60012 | HP | Bar code reader |
| C1192-60026 | HP | Four slot magazine side (guide) kit - Includes one right side and one left side - Model uses seven pair |
| C1192-60038 | HP | Translate encoder strip |
| C1192-60040 | HP | Translate frame assembly - Carriage/Picker assembly attaches to this frame - Includes mount guide/sliders |
| C1192-60041 | HP | Picker assembly umbilical ribbon cable - From picker assembly to controller board |
| C1192-60042 | HP | Translate frame mount guide/slider |
| C1192-60043 | HP | Picker translate (horizontal) umbilical cable |
| C1192-60044 | HP | 1 slot magazine - Cleaning cartridge storage slot |
| C1192-60050 | HP | Rear panel access door interlock cable |
| C1192-60056 | HP | Rear panel access door interlock solenoid assembly |
| C1192-60086 | HP | AC switch assembly |
| C1192-60129 | HP | Mail slot assembly - Front panel disk insertion/removal mechanism - Includes sensors |
| C1192-85000 | HP | Access door key |
| C2905A | HP | High voltage differential SCSI terminator - Has 68 pin high density (M) connector with thumbscrews |
| C2906A | HP | SCSI interface cable with thumbscrews on both ends - 50 pin high density (M) to 68 pin high density (M) - 2.0m (6.6ft) long |
| C2907A | HP | SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 50 pin high density (M) - 5.0m (16ft) long |
| C2911A | HP | SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 0.9m (3.0ft) long |
| C2911C | HP | SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 128 Ohms - 1.0m (3.3ft) long |
| C2924A | HP | SCSI interface cable with thumbscrews on both ends - 68-pin high density (M) to 68-pin high density (M) - 2.5m (8.2ft) long |
| C2924C | HP | SCSI interface cable with thumbscrews on both ends - 68-pin high density (M) to 68-pin high density (M) - 128 Ohms - 2.5m (8.2ft) long |
| C2925A | HP | SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 10m (33ft) long |
| C2926A | HP | SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 20.0m (66ft) long |
| C5175-00202 | HP | Cover panel (Flint Gray) |
| C5175-00203 | HP | Cover panel (Parchment White) - Installed on lower left side |
| C5175-60004 | HP | DLT interposer board - DLT Interposer Board - Mounts to External Panel on Front of the Cabinet (Above the Drives) |
| C5175-60014 | HP | System interior light - Mounts inside on the top |
| C5175-60032 | HP | Autoranging power supply - Supplies +5VDC and +12VDC - 250 watts |
| C5175-60033 | HP | Power supply module - 24V, 120W watt power supply and cable |
| C5175-60048 | HP | Drive cooling fan assembly - Mounts to the drive enclosure |
| C5175-60059 | HP | Internal drive SCSI cable kit - Includes five cables with 68-pin connectors marked 'BUS 0' through 'BUS 4' and 'DRIVE 1' through 'DRIVE 4' - Overall length is 1.7m (5.7ft) |
| C5175-60062 | HP | Ribbon cable - Has 10-pin (F) connectors - 33.8cm (13.3in) long - Drive interface cable - To the interposer board |
| C5175-60066 | HP | Ribbon cable - Has 50-pin (F) connectors - 78.1cm (30.8in) long - GPIO interposer cable - To the interposer board |
| C5175-60067 | HP | Cable assembly - Has three 4-pin (F) connectors - 81.8cm (32.2in) long - UART cable - To the SCSI interface board |
| C5175-60068 | HP | 24V power supply cable |
| C5175-60069 | HP | 12V power supply cable |
| C5175-60092 | HP | Top right corner cover panel assembly |
| C5175-60201 | HP | Library controller board - Library Controller Board - For Half Capacity Libraries |
| C5177-69101 | HP | Library controller board - Library Controller Board - For Full Capacity Libraries |
| C5177-69108 | HP | Single-Ended Differential SCSI interface board - Includes two interface boards with mounting bracket - SCSI Single Ended/Differential Interface Board - Includes Two Interface Boards with Mounting Bracket |
| C5178J | HP | Drive upgrade kit for the DLT 7000 library - Includes two DLT 7000 drives and hardware - Upgrades model 7248w to 7448w |
| C5179J | HP | Capacity upgrade kit for the DLT 7000 library - Includes 20 slots and hardware - Upgrades model 7228w to 7248w |
| C5183J | HP | DLT library 7000 drive/capacity upgrade - Includes two DLT 7000 drives, 20 slots and hardware - Upgrades model 7228w to 7448w by adding drives and capacity |
| C5699A | HP | SCSI interface cable with thumbscrews on both ends - 68-pin high density (M) to 68-pin high density (M) - 2.5m (8.2ft) long |
| C5743A | HP | Low Voltage Differential/Ultra2 Single-Ended SCSI interface cable with thumbscrews on both ends - 68-pin high density (M) to 68-pin high density (M) - 2.5m (8.2ft) long |
| C7522A | HP | SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 128 Ohms - 10.0m (33ft) long |
| C7522AR | HP | SCSI interface cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (M) - 128 Ohms - 10.0m (33ft) long |
| C7532A | HP | SCSI interface cable with thumbscrews on both ends - Has 68 pin high density (M) connectors - 20.0m (65.6ft) long |
| Q2004A | HP | DLTtape IV bar code labels - Package of 100 data cartridge labels and 10 cleaning labels |
京公网安备 11010802036102号