| 配件信息 |
| FC号 | PN号 | 品牌 | 描述 |
| 磁带 |
| 217861-B21 | HP | DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Package of 21 tapes |
| 217862-B22 | HP | DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Package of 315 tapes |
| 295192-B21 | HP | DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Package of seven tapes |
| 295194-B21 | HP | DLTtape IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives |
| C5141-60010 | HP | DLT type IV tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives |
| C5141A | HP | DLTtape IIIXT tape cartridge - 15GB native capacity RoHS: Modified |
| C5141FL | HP | DLTtape IV pre-labeled tape cartridges - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Includes bar code labels - Package of 20 pre-labeled tapes |
| C5141L | HP | DLTtape IV pre-labeled tape cartridge - 20GB native capacity in DLT 4000 drives - 35GB native capacity in DLT 7000 drives - 40GB native capacity in DLT 1, DLT VS80, and DLT 8000 drives - Includes bar code label |
| 磁带驱动器 |
| A4845-69019 | HP | DLT 4000 tape drive mechanism - (A4844A, A4847A) |
| A4845-69020 | HP | DLT 7000 tape drive mechanism - (A4848A, A4867A) |
| A5606-69001 | HP | 20GB HP9840 tape drive mechanism - (A5598A, A5606A) |
| A5606A | HP | 9840 tape drive assembly for 10/588 |
| 其它 |
| 413296-001 | HP | SCSI interface cable with thumbscrews on both ends - 68-pin very high density (M) to 68-pin high density (M) - 90 ohms - 2.5m (8.2ft) long - |
| 413297-001 | HP | SCSI interface cable with thumbscrews on both ends - 68-pin very high density (M) to 68-pin high density (M) - 90 ohms - 5.0m (16ft) long - |
| 413298-001 | HP | SCSI interface cable with thumbscrews on both ends - 68-pin very high density (M) to 68-pin high density (M) - 90 ohms - 10.0m (33ft) long - |
| 5012-8337 | HP | SCSI interface cable with thumbscrews on both ends - 68-pin very high density (M) to 68-pin high density (M), 90 ohms, 1.0m (3.3ft) long - |
| A3639-63011 | HP | SCSI interface cable with thumbscrews on ends - Low profile 68-pin high density (M) to low profile 68-pin high density (M) - 90 ohms - 1.0m (3.3ft) long - (A3401A Option 806, A4852A Option 806, A4854A Option 806) |
| A3639-63012 | HP | SCSI interface cable with thumbscrews on ends - Low profile 68-pin high density (M) to low profile 68-pin high density (M) - 90 ohms - 2.5m (8.2ft) long - (A3401A Option 807, A4852A Option 807, A4854A Option 807) |
| A3639-63013 | HP | SCSI interface cable with thumbscrews on ends - Low profile 68-pin high density (M) to low profile 68-pin high density (M) - 90 ohms - 5.0m (16ft) long - (A3401A Option 808, A4852A Option 808, A4854A Option 808) |
| A3639-63014 | HP | SCSI interface cable with thumbscrews on ends - Low profile 68-pin high density (M) to low profile 68-pin high density (M) - 90 ohms - 10.0m (33ft) long - (A3401A Option 809, A4852A Option 809, A4854A Option 809) |
| A4845-67002 | HP | Key for A4845A and A4846A DLT library systems |
| A4845-67006 | HP | A4845 and A4846A microcode floppy - Rev 1.7 |
| A4845-67009 | HP | Z belt - Provides vertical movement for the picker (Hand) assembly |
| A4845-67011 | HP | Theta belt assembly - Provides arm rotation - Theta Bbelt assembly - Provides arm rotation - Includes clip |
| A4845-67012 | HP | Flex cable assembly - Z-Flex cable assembly - From vertical transport (Z column) to tape cartridge picker (hand) |
| A4845-67015 | HP | Dual fan assembly |
| A4845-67016 | HP | Cartridge access port (CAP) and main door interlock cable assembly - From system library controller board (PRC) to vertical transport PRY board |
| A4845-67018 | HP | Ribbon cable assembly - From control (operator) panel to system library controller board (PRC) |
| A4845-67021 | HP | Cable kit - Includes two DB-9 (F) to RJ-45 (F) connectors and a cable with RJ-45 (M) connectors on both ends - 3.0m (9.8ft) long - PC to Library Adaptor |
| A4845-67022 | HP | SCSI extension cable with thumbscrews on both ends - 68 pin high density (M) to 68 pin high density (F) - 1.2m (4.0ft) long |
| A4845-67023 | HP | DLT SCSI 68-50 pin jumper for DLT 4000 cable assembly - Has 68 pin high density (F) external connectors on each end and a 50 pin (F) internal connector in the middle of the cable - 0.4m (1.4ft) long |
| A4845-67024 | HP | DLT 4000 SCSI ID cable - Located in the drive enclosure |
| A4845-67201 | HP | Power supply, +5VDC and +12VDC output, 50 watts - For the DLT 4000, DLT 7000 and DLT 8000 drives - Mounts inside the back of the drive enclosure |
| A4845-69003 | HP | Narrow single-ended or 8 bit differential SCSI board - Includes the bracket - Narrow - Single-Ended or Eight-Bit Differential SCSI Board - Mounts on the System Library Controller board (PRC) - Includes the Bracket |
| A4845-69004 | HP | System library controller (PRC) board - System Library Controller Board (PRC) |
| A4845-69007 | HP | Wide single-ended or 8 bit differential SCSI board - Includes the bracket - Wide - Single-Ended or Eight-Bit Differential SCSI Board - Mounts on the System Library Controller board (PRC) - Includes the Bracket |
| A4845-69013 | HP | Tape cartridge picker (hand) assembly - Cartridge holding mechanism - Transports cartridges between the storage slots and the DLT drives |
| A4845-69017 | HP | Power supply - 43VDC - For up to six drives |
| A4845-90000 | HP | A4845A DLT library hardware operator's guide |
| A4845-90006 | HP | A4845A DLT library service manual |
| A4845-90007 | HP | A4845A DLT library installation manual |
| A4845-90008 | HP | A4845A DLT library diagnostic guide |
| A4847A | HP | DLT 4000 drive kit - Includes one DLT 4000 drive and tray assembly, 48in (1.22m) SCSI extender cable, installation guide, and manual - DLT 4000 drive kit for 1 to 10 drives |
| A4848A | HP | DLT 7000 drive kit - Includes one DLT 7000 drive and tray assembly, 1.22m (48in) SCSI extender cable, installation guide, and manual |
| A4848AR | HP | DLT 7000 drive kit - Includes one DLT 7000 drive and tray assembly, 1.22m (48in) SCSI extender cable, installation guide, and manual |
| A5606-67003 | HP | SCSI ID cable - For 9840 DLT drive |
| A5606-67004 | HP | 9840 drive power cable assembly - Includes a 24-pin (F) connector marked P2 and a 24-pin (F) connector marked P53 - 16.2cm (6.4in) long - From power supply to drive |
| C2361A | HP | SCSI interface cable with thumbscrews on both ends - 68 pin very high density (M) to 68 pin high density (M) - 90 Ohms - 1.0m (3.3ft) long |
| C2362A | HP | Low voltage differential SCSI (LVDS) interface cable with thumbscrews on both ends - 68 pin very high density (M) to 68 pin high density (M) - 90 Ohms - 2.5m (8.2ft) long |
| C2363A | HP | SCSI interface cable with thumbscrews on both ends - 68 pin very high density (M) to 68 pin high density (M) - 90 Ohms - 10.0m (33ft) long |
| C2365A | HP | SCSI interface cable with thumbscrews on both ends - 68 pin very high density (M) to 68 pin high density (M) - 90 Ohms - 5.0m (16ft) long |
| Q2004A | HP | DLTtape IV bar code labels - Package of 100 data cartridge labels and 10 cleaning labels |
| STK-10075150 | HP | Push mount cable tie-wrap |
| STK-300031301 | HP | Left rear cover panel assembly |
| STK-300031401 | HP | Universal cover assembly |
| STK-300031501 | HP | Right front door - Does NOT include hardware |
| STK-300031602 | HP | Right front door assembly - Includes compression latch, proximity switch magnate, EMI seal foam clad, door stripe, model number plate, and logo retainer |
| STK-300031801 | HP | I/O cover assembly |
| STK-300032201 | HP | Left front door assembly |
| STK-3000368XX | HP | Control (operator) panel and display assembly - Does not include cable |
| STK-3000386XX | HP | Drive communication assembly (PRM) for 7 to 10 drives - Drive Communication Assembly (PRM) - For Systems that Have 7-10 Drives Installed |
| STK-3000393XX | HP | DC motor (Z and Theta) - Used in the vertical transport assembly (Z column assembly) - Two used |
| STK-3036880XX | HP | Power supply for the HP9840 drive - Supplies +5VDC and +12VDC - 50 watts - Mounts inside the back of the drive enclosure |
| STK-307505603 | HP | Wedge/leveler assembly - Placed under the casters to assist in leveling the DLT library system |
| STK-308286604 | HP | Standard magazine assembly - Holds 14 DLT cartridges |
| STK-309172301 | HP | DLT leader repair kit for DLT 4000, DLT 7000, and DLT 8000 - Only trained CEs should use this kit |
| STK-310204201 | HP | Vertical transport (Z column assembly) PRX board - Controls X axis movement |
| STK-310205302 | HP | Robotics assy. PRY PCA |
| STK-310252301 | HP | DLT multi-drive tray - Used when multiple drives are installed |
| STK-310255301 | HP | Tape transport interface cable assembly - Connects from the system library controller board (PRC) to the drives |
| STK-310264302 | HP | Theta coil assembly - Attaches to the theta motor |
| STK-310269703 | HP | Drive cover |
| STK-310269901 | HP | Drive rail assembly |
| STK-310276914 | HP | CAP (Cartridge Access Port) latch assembly |
| STK-310279501 | HP | Expansion kit - Upper hinge |
| STK-310279601 | HP | Expansion kit - Lower hinge |
| STK-310283002 | HP | DC bus/fans cable assembly - Connects the fans to the power supply |
| STK-310283505 | HP | Tape transport interface cable assembly - Connects from the system library controller board (PRC) to the drives |
| STK-310283604 | HP | Standard host serial port cable assembly - Connects from the system library controller board (PRC) to the I/O tower |
| STK-310284601 | HP | Internal power cable assembly |
| STK-310284902 | HP | Tape transport interface cable assembly |
| STK-310289602 | HP | Robotics signal and power cable assembly - Provides control signals and DC voltage to the vertical transport assembly (Z column) and picker (Hand) assemblies |
| STK-3102914XX | HP | Power distribution unit (PDU) - Used only on systems that have 7 to 10 drives installed |
| STK-3102979XX | HP | Proximity switch cable assembly |
| STK-3102998XX | HP | Cable assembly - DLT DC power cable - Located in the drive enclosure |
| STK-313113101 | HP | SCSI ribbon cable - Has an internal 68-pin (M) connector marked `J3`, an external 68-pin (F) connector marked `J1`, and an external 68-pin (F) connector marked `J2` - 71.1cm (16.2in) long - From DLT 7000 rear panel to system library controller board |
| STK-313114803 | HP | DLT 7000 SCSI ID cable assembly |
| STK-313623701 | HP | CAP (Cartridge access port) door assembly - Cartridges are inserted and removed through this door |
京公网安备 11010802036102号