配件信息 |
FC号 | PN号 | 品牌 | 描述 |
导轨 |
| 432461-001 | HP | Enclosure rackmount kit - Includes right and left shelf rails, and M5 square hole cage and clip nuts |
| 455980-001 | HP | Internal rail kit |
电源 |
| 441830-001 | HP | Power supply (1200W) - Hot plug, 1U, 12V DC outputPower supply (1200W) - Hot plug, 1U, 12V DC output |
风扇 |
| 413996-001 | HP | Active Cooling fan 200 module |
其它 |
| 389015-001 | HP | Filler panel - Installed into unused drive bay to maintain airflow |
| 441825-001 | HP | Power supply blank |
| 441835-001 | HP | Hardware plastics kit - Contains a mini divider, a half-height divider, an interconnect bay divider, right and left bezel ear handle, and a management module latch |
| 455973-001 | HP | Hard drive drawer bezel |
| 455974-001 | HP | Power block with power backplane boards |
| 455975-001 | HP | Power block board kit - Includes 7 segments, with cables |
| 455976-001 | HP | Hard drive drawer with hard drive backplane and cables |
| 455977-001 | HP | Fan power board with cables |
| 455978-001 | HP | Extension arm with cables |
| 455979-001 | HP | LED display board - Includes cable |
| 463756-001 | HP | I/O module blank |
| 498472-001 | HP | 2-port I/O module board with tray and cable |
| 511817-001 | HP | LFF Hard drive hot-plug blank - Large Form Factor (LFF), Slimlin |
| AJ866A | HP | HP StorageWorks MDS600 with Dual I/O Modules Disk System |
| AP763A | HP | HP StorageWorks MDS600 Dual I/O Module Option Kit |
线缆 |
| 142258-004 | HP | Power Distribution Unit (PDU) power cord (Black) - IEC 320 C14 (M) connector to right angle IEC 320 C13 (F) connector - 3.6m (11.8ft) long - 250V, 16A |
硬盘 |
| 454273-001 | HP | 1TB hot-swap Serial ATA (SATA) hard drive - 7,200 RPM, 3GBps transfer rate with Native Command Queing (NCQ), 3.5-inch form factor |
| 508010-001 | HP | 2TB hot-plug SAS (6Gbp/s) hard disk drive - 7,200 RPM, 3.5-inch large form factor (LFF) |
| 517350-001 | HP | 300GB SAS Hard drive - 15,000 RPM, 3.5in form factor, double port |
| 517352-001 | HP | 450GB SAS hard drive - 15,000 RPM, 3.5in form factor |