品牌 | 类型 | FC号 | PN号 | 描述 |
---|
HP | 其它 | | A5597-67026 | Operator panel ribbon cable - Has connectors marked P28 and P240 - 0.6m (1.9ft) long - From connector J28 on the MPC card to the operator panel (MPO) card |
HP | 其它 | | A5597-67027 | SCSI interface cable with thumbscrews on both ends - 68-pin high density (M) to 68-pin high density (M) - 0.5m (1.6ft) |
HP | 其它 | | A5597-67028 | SCSI jumper cable - 6.4cm (2.5in) long - From DLT drive enclosure to DLT drive |
HP | 其它 | | A5597-67030 | Cable assembly - Has connectors marked P551, P551A, and P551B - 28.6cm (11.3in) long - DC fan cable assembly - From connector J551 on MPC card to electronic module fan tray assembly and to drive bay exhaust fan power cable |
HP | 其它 | | A5597-67031 | Drive bay exhaust fan power cable assembly - Has connectors marked P551A and P551E - 2.5m (8.3ft) long - From connector P551A on the DC fan cable assembly to drive bay exhaust fans |
HP | 其它 | | A5597-67033 | Retainer (cartridge guide) used to hold a six-cell tape cartridge magazine in place |
HP | 其它 | | A5597-67034 | Personality key cable assembly - Has a DB-9 (F) connector and another connector marked P550 - 15.7cm (6.2in) long - Attached to connector J550 on the MPC card |
HP | 其它 | | A5597-69009 | DC power supply (MPF) assembly for the library - Supplies +5V, -15V, +15V, +24V, and +43V - One or two are used |
HP | 其它 | | A5597-69015 | MPV expansion card - Installed in the compact peripheral component interconnect (CPCI) card cage |
HP | 其它 | | A5597-69112 | Library controller (MPC) card - Controls robotics and executes host commands for all library operations |
HP | 其它 | | A5599-67004 | Enclosure connector and cable assembly - Includes enclosure connector, AC power wires with spade (F) connectors, a ground wire, a 5-pin (F) connector, and 0.6m (2.0ft) cable with a 22-pin (F) connector - Installed on DLT drive enclosure |
HP | 其它 | | A5599-67007 | Drive power cable assembly - Includes a 7-pin (F) connector marked P3, a 4-pin (F) connector marked P2, and a 2-pin (F) connector marked P4 - 14.4cm (5.7in) long - From drive power supply to DLT or LTO drive |
HP | 其它 | | A5600A | Second drive tower kit - Upgrades a ten drive drive library to support up to ten more drives - Includes tower assembly, expansion PC board, cables, a fan assembly, and hardware - Drives must be purchased separately |
HP | 其它 | | A5600AR | Second drive tower kit - Upgrades a ten drive drive library to support up to ten more drives - Includes tower assembly, expansion PC board, cables, a fan assembly, and hardware - Drives must be purchased separately |
HP | 其它 | | A5606-67003 | SCSI ID cable - For 9840 DLT drive |
HP | 其它 | | A5606-67004 | 9840 drive power cable assembly - Includes a 24-pin (F) connector marked P2 and a 24-pin (F) connector marked P53 - 16.2cm (6.4in) long - From power supply to drive |
HP | 其它 | | A5606-67005 | 9840 drive tape transport interface (TTI) cable assembly - Has a DB-25 (M) connector marked P40, a 4 pin (F) connector marked EP1, and a 4 pin (M) connector marked TTI - 0.6m (1.8ft) long |
HP | 其它 | | A5606-67007 | SCSI `Y` cable kit for 9840 drive - Includes 68-pin (M) high density SCSI terminator with thumbscrews, 4 screws to mount SCSI connectors, and a SCSI `Y` cable with connectors marked J1, J2, and J3 |
HP | 其它 | | A5616-67002 | Bus control module filler panel - Installed when using only one bus control module |
HP | 其它 | | A5616-67003 | Fan filler panel - Installed when using only one fan |